The drive is connected to the beaters through a set of a Sun and Planetary gears. The planetary motion is imparted for mixing / blending solid-solid, liquid-solid & liquid-liquid products.
Cylindrical with welded bottom dish and flanged top dish. It is provided with 3 castor wheels for moving necessary nozzles are provided on top dish and vessel. Top dish is attached to drive mounting plates so as to lift and move down by means of column and lifting arrangement. Depend upon process conditions & product characteristics and batch size, vessel can be designed. Agitator Assembly
It consists off one or two beaters, either open paddle type or closed type, with scrapper or without it. The beaters are attached to planetary gears which are driven by motor-gearbox combination.
Drive it includes a motor v-belted to a worm reduction gearbox and spur-geared to planetary gears. Total drive is mounted on two arms of a column so as to move up and down over it.
Lifting mechanism- It is mechanical type with a lead screw and a guide-bar with a sleeve to move vertically up and down a column mounted on a stool. The sleeve is mounted with drive load. There will be a motor and gearbox combination for operating. Modification/ variation / types available :
Depending on product/process conditions, following types are available-
- powder mixer / ointment mixer.
- Jacketed / non jacketed bowl for heating / cooling / limpet.
- With in -tank homoginiser and vacuum application.
- Flat dished bottom / torispherical bottom for vessel / bowl
- Mechanical / hydraulic lifting
- Open /closed type beaters.
- Bowl with castor wheels / railings.
- Discharge- Pumped/pressed/ gravity by tilting.
- M.O.C SS304 / 316 /L /Carbon steel.
- Controls on/off, M.C.C / PLC based.
- Motors- FLAMEPROOF/FLAMEWORTHY/STANDARD.
Product that can be blended- Pharma bulk drug powders / wet mass, resins and compounds , ointments creams, pastes, ink, adhesives, rubber compounds. For Powder Mixing Standard Plm
|Model & Details ||PLM 100 ||PLM 200 ||PLM 350 ||PLM 500 ||PLM 750 ||PLM 1000 |
|Gross Cap. Ltrs ||110 ||220 ||380 ||520 ||780 ||1100 |
|Bowl dimensions Dia x ht in mm ||Will be provided during ordering |
|Overall dimensions LX WX H in mtrs ||1 x 1.6 x 2 ||1.1 x 1.9 x 2.1 ||1.1 x 2.2 x 2.5 ||1.4 x 2.8 x 2.5 ||1.6 x 3 x 2.8 ||2 x 3 x 3 |
|Total HP* ||Will be provided during ordering |
|Net Weight In Kg ||1 x 00 ||1500 ||1800 ||2600 ||3000 ||3500 |
|Gross Wt In Kg ||XX00 ||2100 ||2100 ||3200 ||3500 ||4000 |
* Only For Mixing/Lifting/ Not For Charging/Discharge